Suchen

 
Eingaben löschen
670 Ergebnisse:
381. Wickelstand_manuell_engl.pdf  
Systems Printing BöttcherTex Winding station Manual winding station for self-manufacturing of mini rolls from 500 m maxi rolls. Application Manual winding station CE-approval Fast winding process  gear ratio 1:1,8 The self-manufactured mini rolls can immediately be used in the automatic washing device For cloth width of max. 1090 mm, other  
382. Wipe_engl.pdf  
Systems Printing BöttcherTex Wipe For manual cleaning of all kind of soiled surfaces. Application Cloth on a roll Thanks to extreme resistance to tearing, abrasion and picking no fibre residues on the cleaned surfaces Lint-free cloth good capillary action, good solvent stability cloth consists of cellulose and polyester Properties High  
383. BT_7700_eng.pdf  
Systems Printing BöttcherTop 7700  Presses Sheetfed  Packing height Conform to OEM recommendations  Substrates Paper and carton  Inks Conventional and vegetable oil-based, UV  Wash-up solvents Conventional, low VOC, VOC-free, UV  Micro-ground printing Application Sheetfed blanket Sharp and Crisp halftones surface,  
384. BT_1010_eng.pdf  
… with compressible ease stripping layer Suitable for flute board Compensates for anilox roller bounce  Smooth surface finish (Ra: 0.4-0.7μm) No surface pattern visible in print,…  
385. Filtration of washes  
Filtration of washes Filtration of washes Filtration of washes Filtration of washes Filtration of washes Filtration of washes Filtration of washes Systems �� Printing Filtration of Washes In order to reduce costs of washes and waste disposal printing shops are investing more and more in filtration systems. The process of recycling dirty  
386. Gloves_engl.pdf  
Systems �� Printing Böttcher Protection Gloves Correct Use Protective gloves should be used whilst handling printing chemicals. In order to protect your hands, please consider the following steps when using gloves. Pulling the gloves on Select the correct size and ensure they fit properly, not too large or too small. Before each use check the  
387. Use_of_Calcit_engl.pdf  
Systems Printing BöttcherPro Calcit Use of Water Re-Hardener BöttcherPro Calcit is a water re-hardener for use in conjunction with RO (reverse osmosis) water or with very soft water, to standardise the water hardness. Application During the RO process all mineral salts and vegetable/algae in the water are removed. Before use, the completely  
388. Filterbags.pdf  
Systems Printing 802140 Filter Bag for Fountain System No. 1 With 12mm-hose (see picture) For Royse systems. Also suitable for many presses of Heidelberg, Komori and manroland where a 12mm-hose fits on return-flow. Length 215mm, width 165mm 802137 Filter Bag for Fountain System No. 6 For Technotrans Alpha D circulation systems fitted to  
389. Electronic_pH_Meter_engl.pdf  
Systems Printing Electronic pH Meter For Measuring pH Value of Fountain Solution Part number: 803025 sensor, with automatic temperature compensation sensor that will not break easily no requirement to store sensor in fluid fast response stable sensitivity characteristic only a small amount of fountain solution required automatic 2-point-and  
390. Manual_Pumps_engl.pdf  
Systems Printing Manual Pumps for Drums Suitable for all Böttcher Printing Chemicals (Flash Point 21 – 100°C) and Böttcherin IPA Part number: 801631 including hose set, black conductive hose 1.5 m DN 19 x 4 with outlet bend AK 20 capacity ca. 0.1 l/stroke single-acting suction tube for diving depth 935 mm drum thread G2“ with siphon effect  
Suchergebnisse 381 bis 390 von 670