Búsqueda

 
Reset
641 results:
371. BöttcherTex_Ultima_engl.pdf  
Systems Printing BöttcherTex Ultima Cleaning web for automatic blanket washing units, especially recommended for KBA Planeta. application Cleaning web The used cellulose material contains very long fibres, therefore very few fibre residues on the Thanks to the alignment of the fibres the cloth shows an improved tear resistance in winding  
372. Wickelstand_engl.pdf  
Systems Printing BöttcherTex Winding station Motor driven winding station for self-manufacturing of mini rolls from 500 m maxi rolls. Application Motor driven winding station CE-approval The self-manufactured mini rolls can immediately be used in the automatic washing device For cloth width of max. 1090 mm, other dimensions on request  
373. Wickelstand_manuell_engl.pdf  
Systems Printing BöttcherTex Winding station Manual winding station for self-manufacturing of mini rolls from 500 m maxi rolls. Application Manual winding station CE-approval Fast winding process  gear ratio 1:1,8 The self-manufactured mini rolls can immediately be used in the automatic washing device For cloth width of max. 1090 mm, other  
374. Wipe_engl.pdf  
Systems Printing BöttcherTex Wipe For manual cleaning of all kind of soiled surfaces. Application Cloth on a roll Thanks to extreme resistance to tearing, abrasion and picking no fibre residues on the cleaned surfaces Lint-free cloth good capillary action, good solvent stability cloth consists of cellulose and polyester Properties High  
375. BT_7700_eng.pdf  
Systems Printing BöttcherTop 7700  Presses Sheetfed  Packing height Conform to OEM recommendations  Substrates Paper and carton  Inks Conventional and vegetable oil-based, UV  Wash-up solvents Conventional, low VOC, VOC-free, UV  Micro-ground printing Application Sheetfed blanket Sharp and Crisp halftones surface,  
376. BT_1010_eng.pdf  
… with compressible ease stripping layer Suitable for flute board Compensates for anilox roller bounce  Smooth surface finish (Ra: 0.4-0.7μm) No surface pattern visible in print,…  
377. Filtration of washes  
Filtration of washes Filtration of washes Filtration of washes Filtration of washes Filtration of washes Filtration of washes Filtration of washes Systems �� Printing Filtration of Washes In order to reduce costs of washes and waste disposal printing shops are investing more and more in filtration systems. The process of recycling dirty  
378. Gloves_engl.pdf  
Systems �� Printing Böttcher Protection Gloves Correct Use Protective gloves should be used whilst handling printing chemicals. In order to protect your hands, please consider the following steps when using gloves. Pulling the gloves on Select the correct size and ensure they fit properly, not too large or too small. Before each use check the  
379. Use_of_Calcit_engl.pdf  
Systems Printing BöttcherPro Calcit Use of Water Re-Hardener BöttcherPro Calcit is a water re-hardener for use in conjunction with RO (reverse osmosis) water or with very soft water, to standardise the water hardness. Application During the RO process all mineral salts and vegetable/algae in the water are removed. Before use, the completely  
380. Filterbags.pdf  
Systems Printing 802140 Filter Bag for Fountain System No. 1 With 12mm-hose (see picture) For Royse systems. Also suitable for many presses of Heidelberg, Komori and manroland where a 12mm-hose fits on return-flow. Length 215mm, width 165mm 802137 Filter Bag for Fountain System No. 6 For Technotrans Alpha D circulation systems fitted to  
Search results 371 until 380 of 641